Visionary Solutions’ AVN420 h.264 (AVC, MPEG-4 part 10) over IP encoder blade (card) is used in the Media Processing Platform (MPP), a high density rackmount system for video over IP transport. Plug a video source directly into the blade, plug into the network via the RJ-45 connection, and stream real time DVD quality video over your LAN or WAN. The MPP with AVN420 blades is suitable for all applications requiring cost effective low bit rate video distribution over IP networks. There are two MPP chassis options, the MPP1700 has the option of dual redundant power supplies and holds up to 17 blades, while the MPP200 has a single power source and can hold 2 blades.
Superior Audio/Video Quality h.264 (MPEG-4 Part 10/AVC) hardware compression and Visionary Solutions’ optimized transmission technology provides a video image at full frame rates and D1 resolution. The video stream can be viewed by an unlimited number of clients on a LAN or WAN with 25fps PAL or 30fps NTSC assured, provided that bandwidth is available. Image resolutions are configurable from D1 (720x480 NTSC, 720x576 PAL) down to 160x120. The video bit rate can be configured from 100 kbps to 4 Mbps. The audio compression is either AAC or MPEG-1 Layer 2 audio encoding at 8 to 384 kbps with up to 48 KHz sample rate.
Video Inputs The AVN420 includes one BNC composite input and one S-Video input for connecting video source equipment.
Audio Inputs A terminal block connector provides audio inputs for Balanced and Unbalanced connections. This allows for easy onsite connections regardless of the cabling outputs of the audio source. The AVN420 features user control of audio parameters, including mute, pre-amp and volume.
External Device Connections The AVN420 includes a serial connection via an RJ-45 connector. This connector can be used as an RS-232 port (full duplex, no hand shaking) or an RS-422 (full-duplex) port. These ports allow the AVN420 to interface with external devices such as terminal emulation equipment.
Management & Configuration of the device is accomplished by any of four methods, PackeTV™ Configuration Utility, console menus, a web interface, or the AVN Control Protocol API. TCP/ IP, HTTP, and other Internet-related protocols are supported.
PackeTV™Configuration Utility (included) enables quick and efficient setup and mass reconfiguration of key settings including bit rate, video resolution and multicast destination IP addresses.
1. Standard 30 Days Return Policy
2. Manufacturer's limited warranty
3. All Specifications subject to change without notice.
Datasheet
