The AVN443HD Encodes high definition or standard definition video, HDMI (DVI-D with optional adaptor cable), HD-SDI or SD-SDI inputs, up to 1080p in an h.264 stream (MPEG-4 Part 10/AVC) for high quality video at lower bandwidths. This compact encoder streams at 4 to 20 Mbps throughput. It has balanced and unbalanced audio inputs and volume control plus RS-232 and RS-422 control accessed via an RJ-45 receptacle. Ideal for larger systems - mounts in a high-density Media Processing Platform (up to 8 channels in a three RU chassis size).
Video Encoder, HD & SD H.264/MPEG-4 over IP blade server, HDMI/DVI-D & SDI (3G) inputs, includes 480i (59.94Hz) and 576i (50Hz), HD resolutions require optional module
Superior Audio/Video Quality h.264 (MPEG-4 Part 10/AVC) hardware compression and Visionary Solutions’ optimized transmission technology provide a high definition, full frame rate, IP video stream. The stream can be viewed by an unlimited number of clients on a LAN or WAN provided that bandwidth is available. Image resolutions are configurable to 720p or 1080i at 50 or 60 frames per second or 1080p at 24 frames per second. The video bit rate can be configured from 4 to 18 Mbps. The audio compression is either AAC (128 to 512 kbps audio encoding) or MPEG-1 Layer 2 (64 to 384 kbps audio encoding) with up to 48 kHz sample rate.
Video Inputs The AVN443HD includes one BNC connector for HD-SDI input, and one HDMI input (DVI-D with optional adaptor cable) for connecting video and audio source equipment.
Audio Inputs A terminal block connector provides audio inputs for Balanced and Unbalanced connections. This allows for easy onsite connections regardless of the cabling outputs of the audio source. There are also two RCA audio connectors (L/R) which support only unbalanced connections, and the HDMI input carries audio as well. The AVN443HD can also extract embedded audio from the HD-SDI input.
External Device Connections The AVN443HD includes a serial connection via an RJ-45 connector. This connector can be used as an RS-232 port (fullduplex, no hand shaking) or an RS-422 (full-duplex) port. These ports allow the AVN443HD to interface with external devices such as terminal emulation equipment.
Management & Configuration of the device is accomplished by any of four methods: PackeTV™ Configuration Utility, console menus, a Web interface, or the AVN Control Protocol API. TCP/ IP, HTTP and other Internet-related protocols are supported.
PackeTV™Configuration Utility enables quick and efficient setup and mass reconfiguration of key settings including bit rate, video format and multicast destination IP addresses.
1. Standard 30 Days Return Policy
2. Manufacturer's limited warranty
3. All Specifications subject to change without notice.